Standard International Electrotechnical Commission (IEC) en anglais ou Commission électrotechnique internationale (CEI)
| ISO/IEC 11801 | Information technology – Cabling systems for customer premises |
| ISO/IEC 14763-1 | Information technology – Implementation and operation of customer premises cabling – Part 1: Administration |
| ISO/IEC 14763-2 | – Part 2: Planning and installation |
| ISO/IEC 8802-3 | Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Specific requirements – Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
| ISO/IEC 9314-3 | Information processing systems – Fibre distributed Data Interface (FDDI) – Part 3: Physical Layer Medium Dependent (PMD) |
| ISO/IEC 9314-4 | – Part 4: Single-mode fibre physical layer medium dependent (SMF-PMD) |
| IEC 60038 | IEC standard voltages |
| IEC 60068-1 | Environmental Testing – Part 1: General and Guidance |
| IEC 60068-2 | – Part 2: Tests |
|
IEC 60079-0
|
Electrical apparatus for potentially explosive atmospheres; General requirements (EN 50014) |
| IEC 60096-1 | Radio-frequency cables. – Part 1 : General requirements and measuring methods |
| IEC 60332 | Tests on electric cables under fire conditions |
| IEC 60332-1 | – Part 1: Test on a single vertical insulated wire or cable |
| IEC 60332-2 | – Part 2: Test for vertical flame spread of vertically-mounted bunched wires or cables |
| IEC 60512-2 | Electromechanical components for electronic equipment – Basic testing procedures and measuring methods – Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests |
| IEC 60512-3 | – Part 3: Current-carrying capacity tests |
| IEC 60512-4 | – Part 4: Dynamic stress tests |
| IEC 60512-5 | – Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests |
| IEC 60512-6 | – Part 6: Climatic tests and soldering tests |
| IEC 60512-7 | – Part 7: Mechanical operating tests and sealing tests |
| IEC 60512-8 | – Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations |
| IEC 60512-11 | – Part 11: Climatic tests – Section 7: Test 11g: Flowing mixed gas corrosion test – Section 14: Test 11p: Flowing single gas corrosion test |
| IEC 60529 | Degree of protection provided by enclosure (IP Code) |
| IEC 60793-2 | Optical fibres – Part 2: Product specifications |
| IEC 60794 series | Optical fibre cables |
| IEC 60794-2 | – Part 2: Indoor cables – Sectional specification |
| IEC 60825-1 | Safety of laser products – Part 1: Equipment classification, requirements and user’s guide |
| IEC 60825-2 | – Part 2: Safety of optical fibre communication systems |
| IEC 60874 | Connectors for optical fibres and cables |
| IEC 60874-1 | – Part 1: Generic specification |
| IEC 60874-2 | – Part 2: [IEC 60874-2 Ed.2.0 (1993, standard for F-SMA connector) has been withdrawn by TC86B in 2002 without replacement] |
| IEC 60874-10 | – Part 10: Sectional specification for fibre optic connector – Type BFOC/2,5 |
| IEC 60874-14 | – Part 14: Sectional specification for fibre optic connector – Type SC |
| IEC 60874-19 | – Part 19: Sectional specification for fibre optic connector – Type SCD(uplex) |
| IEC 60945 | Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results |
| IEC 61034-1 | Measurement of smoke density of cables burning under defined conditions – Part 1: Test apparatus |
| IEC 61034-2 | – Part 2: Test procedure and requirements |
| IEC 61076-2-101 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications – Part 2-101: Detail specification for circular connectors with screw and snap-in coupling M8 and M12 for low-voltage switchgear and controlgear |
| IEC 61076-3-106 | – Part 3-106: 8 way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the 60603-7 series interface |
| IEC 61156-1 | Multicore and symmetrical pair/quad cables for digital communications – Part 1: Generic specification |
| IEC 61156-2 | – Part 2: Horizontal floor wiring, Sectional specification |
| IEC 61156-3 | – Part 3: Work area wiring, Sectional specification |
| IEC 61300-2 | Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2: Tests |
| IEC 61753-1-1 | Fibre optic interconnecting devices and passive components performance standard – Part 1-1: General and guidance – Interconnecting devices (connectors) |
| IEC 61850 | Communication networks and systems in substations |
| IEC 61984 | Connectors – Safety requirements and tests |
| IEC 62439 Draft | Media Redundancy Protocol – Anneau Ethernet sur la base du protocole HiperRing Hirschmann |
Une réflexion sur « Standards IEC »